LI‐CP‐06 | Carbon Resistive Ink | Likhotronics

LI‐CP‐06 | Carbon Resistive Ink

Likhotronics | Description:

Carbon resistive ink in an organic polymeric solution. It is specially formulated for printed electronic applications on glass.

Likhotronics | Product Advantages:
  • One component system. ‐ No mixing required.
  • Solvent based system
  • Electrically resistive
  • Refrigeration not required.
  • low viscosity paste – viscosity can be further reduced by adding EtOAc/BuOAc.
Likhotronics |  Ink Preparation:

Stir (or shake) the ink thoroughly before use to ensure the product is well mixed, care should be taken to avoid introducing air bubbles. Do not add used ink back into the container to avoid cross contamination.

Download DataSheet Enquire Now

Likhotronics Properties of the Uncured Paste:

Test Properties
Solids 20‐24%
Density (g/mL) 1.06
Viscosity* (centipoise, cP) 20‐25k at 10 shear rate
Substrate compatibility Glass/PET

Likhotronics Curing/Drying Schedule:

Test Temperature
Oven drying 120°C for 45mins

Likhotronics Typical Properties (when dried/cured):

Test Properties
Resistance 1.5‐2.0 kΩ /□/25μm
Adhesion Good on Glass

Download DataSheet Enquire Now

Likhotronics Storage and Shelf‐life:

Containers should be stored as specified with lids tightly sealed at room temperature (25°C).
Normal shelf‐life is 6 months. Extended shelf‐life can be achieved by storing inks in a fridge at 4‐8°C (do not freeze). Allow ink to warm up to room temperature before opening.

Likhotronics Cleaning:

The dried paste can be cleaned using solvents such as EtOAc/BuOAc.

Download DataSheet Enquire Now
full-width

footer