LI‐CP‐04 | Carbon Paint | Likhotronics

LI‐CP‐04 | Carbon Paint

Likhotronics | Description:

Carbon paint is a resistive carbon material in an organic polymeric solution. It is specially formulated to create electronic application on paper on a bigger canvas. It can be applied on paper through brush and create a large area circuit.

Likhotronics | Product Advantages:
  • One component system. ‐ No mixing required.
  • Solvent based system
  • Electrically resistive
  • Refrigeration not required.
  • Low viscosity paste – viscosity can be further reduced by adding solvent.
Likhotronics | Ink Preparation:

Stir (or shake) the ink thoroughly before use to ensure the product is well mixed, care should be taken to avoid introducing air bubbles. Do not add used ink back into the container to avoid cross contamination.

Likhotronics | Possible application:

To make a circuit on bigger canvas. DIY application. Capacitive sensor

Download DataSheet Enquire Now

Likhotronics Properties of the Uncured Paste:

Test Properties
Solids 24‐26 %
Density (g/mL) 1.08
Viscosity* (centipoise, cP) 150‐250 at 10 shear rate
Substrate compatibility PET/ Paper

Likhotronics Curing/Drying Schedule:

Test Temperature
Oven drying 80°C for 5mins/or Room temperature for 10mins
Adhesion Good on PET/Paper

Download DataSheet Enquire Now

Likhotronics Storage and Shelf‐life:

Keep on cool place. Normal shelf‐life is 6 months. Extended shelf‐life can be achieved by storing inks in a fridge at 4‐8°C (do not freeze).

Likhotronics Cleaning:

The dried paste can be cleaned using solvents such as water/EtOH/MeOH.

Download DataSheet Enquire Now